How To Set Petsafe Collar

Stay & Play®
Wireless Contend
Receiver Collar for
Stubborn Dog

PIF00-13672
Product Transmission

PLEASE READ THIS Unabridged PRODUCT MANUAL Earlier BEGINNING

Welcome
You and your pet were made for each other. Our aim is to help you have the best companionship and the well-nigh memorable moments together. Your new PetSafe ® Stay & Play ® Wireless Fence Receiver Collar for Stubborn Dogs is designed to requite your pet maximum
freedom while keeping him safe.
We know that prophylactic pets make happy owners. Before getting started, delight take a moment to read through the important safe information. If you accept whatever questions, please don't hesitate to contact united states.

Hereinafter Radio Systems Corporation, Radio Systems PetSafe Europe Ltd., Radio Systems Australia Pty Ltd., and any other affiliate or brand of Radio Systems Corporation may be referred to collectively every bit "We" or "Us."

Important Safety Information

Caption of Attention Words and Symbols used in this product manual

This is the safety warning symbol. It is used to alert y'all to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING indicates a hazardous situation that, if not avoided, could effect in death or serious injury.
CAUTION, used with the safety alert symbol, indicates a hazardous state of affairs that, if not avoided, could effect in modest or moderate injury.
CAUTION, used without the safety warning symbol, indicates a hazardous situation that, if not avoided, could result in harm to your pet.
NOTICE is used to accost safe employ practices non related to personal injury.

Not for use with aggressive dogs. Do not use this product if your dog is prone to ambitious behavior. Aggressive dogs tin cause severe injury or death to their owners and others. If you are non sure that this product is right for your canis familiaris, delight talk to your veterinarian or a certified trainer.
The battery should be charged in areas with temperatures ranging from 32°F to 104°F / 0°C to xl°C. Recharging the battery outside of its temperature range tin can cause the bombardment to overheat, explode or catch fire.
This device contains Lithium-Ion (Li-Ion) batteries; never incinerate, puncture, deform, brusque-circuit, or charge with an inappropriate charger. Burn, explosion, property damage, or bodily harm may occur if this warning is not followed.

This production is non a toy. Keep it out of the reach of children.

This PetSafe® Stay & Play® Wireless Debate for Stubborn Dogs is Not a solid barrier. The organization is designed to act equally a deterrent to remind pets y Static Correction to remain in the boundary established. It is important that you reinforce training with your pet on a regular basis. Since the tolerance level to Static Correction varies from pet to pet, Radio Systems Corporation CANNOT guarantee that the system will, in all cases, proceed a pet inside the established purlieus. Not all pets can exist trained to avoid crossing the purlieus! Therefore, if you have reason to believe that your pet may pose a danger to others or impairment himself if he is not kept from crossing the boundaries, you should NOT rely solely upon the PetSafe® Stay & Play® Wireless Debate for Stubborn Dogs to confine your pet. Radio Systems Corporation shall NOT be liable for whatsoever property damage, economic loss, or any consequential damages, sustained as a issue of any animal crossing the boundary.

Proper fit of the collar is important. A collar worn for too long or made too tight on the pet's neck may crusade skin damage, ranging from redness to pressure ulcers. This status is usually known as bed sores.

Avert leaving the neckband on the dog for more 12 hours per day.
When possible reposition the neckband on the pet's neck every 1 to ii hours.
Bank check the fit to prevent excessive force per unit area; follow the instructions in this manual.
Never connect a lead to the electronic collar; information technology will crusade excessive force per unit area on the contacts.
When using a separate neckband for a pb, don't put pressure on the electronic neckband.
Wash the dog's cervix area and the contacts of the collar weekly with a damp cloth.
Examine the contact surface area daily for signs of a rash or a sore.
If a rash or sore is institute, discontinue apply of the neckband until the skin has healed.
If the condition persists beyond 48 hours, run into your veterinarian.
For additional information on bed sores and pressure level necrosis, please visit our website.

These steps volition aid keep your pet secure and comfy. Millions of pets are comfortable while they wear stainless steel contacts. Some pets are sensitive to contact pressure. You may find after some fourth dimension that your pet is very tolerant of the collar.
If so, you may relax some of these precautions. It is of import to continue daily checks of the contact area. If redness or sores are found, discontinue use until the skin has fully healed.

Yous may demand to trim the hair in the area of the Contact Points. Never shave the dog'south cervix; this may lead to a rash or infection.
Ever remove your canis familiaris'due south Receiver Neckband before performing whatever Transmitter testing.
The Receiver Collar should not exist on your dog when the system is tested. Your pet may receive an unintended correction.
If you employ a collar and leash for training, exist sure the actress collar does not put pressure on the contact points.
Never remove power from the system when the neckband is on the pet. This may activate the Receiver Collar.

Do not charge your Receiver Collar every nighttime.
Charging too often can reduce bombardment life. Charge your Receiver Collar when the Receiver Indicator Lite blinks yellow; or when the light blinks red.

How the Organisation Works

The PetSafe® Stay & Play® Wireless Fence for Stubborn Dogs has been proven safe, comfortable, and constructive for pets over 5 pounds.
The organisation works by transmitting a radio signal upwards to 105 feet in all directions. You temporarily define the Pet Area with Boundary Flags for a visual aid in grooming your pet. Your pet wears a Receiver Collar with Contact Points that touch his neck, and, once trained, is immune
to roam freely in the Pet Surface area. When your pet reaches the Purlieus Zone, the Receiver Collar gives a warning tone before delivering a
safe Static Correction through the Contact Points to become his attention until he returns to the Pet Expanse.

Key Definitions

Receiver Neckband: Receives the radio signal from the Transmitter.
Fashion Button: Turns Receiver on/off and adjusts the level of Static Correction your pet receives outside the Pet Expanse.

Receiver Indicator Light: Indicates the level of correction at which the Receiver Collar is set. This light too indicates battery status.
Contact Points: Deliver the condom Static Correction when your pet moves into the Boundary Zone.
Receiver Charger: Charges the batteries inside the Receiver Collar
Receiver Charge Jack: Connection point for charging Receiver bombardment.

Receiver Collar

Footstep 1. Accuse the Receiver Neckband

The Receiver Collar Charger is designed to plug into a standard AC wall outlet. The Receiver Collar lite will glow blood-red when the Receiver Charger is properly seated into the Receiver Charge Jack. The low-cal volition plow green when charging is complete. A congenital-in safety circuit prevents the Receiver Collar from overcharging.
The Receiver Neckband volition achieve a total charge in 2-3 hours. Each charge tin can concluding up to 3 weeks depending upon the frequency of use.

Do not charge your Receiver Neckband every night. Frequent charging can have a negative upshot on the battery. We recommend that the Receiver Collar be used until the Receiver Indicator Calorie-free blinks xanthous or red.

To charge the Receiver Collar, lift and slide the Receiver Neckband strap away from the front end of the unit of measurement (1A). Lift the safe plug to permit access to the Receiver Charge Jack.
The safe plug needs to remain attached to the Receiver Collar. Plug the Receiver Charger into the Receiver Charge Jack on the Receiver Collar. The Receiver Charge Jack and Receiver Charger are keyed to fit one style. Do not forcefulness it in astern.

Step ii Gear up the Receiver Neckband

Your Receiver Collar comes with Curt Contact Points. Use the Long Contact Points for pets with long or thick hair. Tighten the Contact Points using the Contact Point Wrench (2A).
Check tightness weekly.

Turning the Receiver Collar ON
Printing and hold the Style Push continuously for 5 seconds (2B). The Greenish or Yellow or Red Receiver Indicator Low-cal will plough ON for 5 seconds (2C) to indicate bombardment status, followed past the Red Receiver Indicator Low-cal flashing the Static Correction Level Settings.

Turning the Receiver Collar OFF
Printing and hold the Mode Button continuously for 5 seconds. The Red Receiver Indicator Light will be ON during this time. The Red Receiver Indicator Light will then turn OFF and all Receiver Indicator Lights will stay OFF indicating that the unit is turned OFF.
To extend the fourth dimension between charging the Receiver Neckband, consider turning OFF the Receiver Neckband when it is not in use.

Receiver Collar Status Indicators
The Receiver Collar Status Indicator Light along with the Receiver Collar Warning Tone is used to determine the battery status and the correction type. Refer to the Receiver Collar Status Indicator Table below to understand the status lights and tones for the Receiver Collar.
During normal functioning, the Receiver Collar Indicator Light will flash every 4-5 seconds to betoken the battery status as shown in the table below.

Receiver Collar Status Indicator Tabular array

Condition Calorie-free

Warning Tone

Condition

While Plugged into Receiver Charger

Solid ruby	No tone	Charge in progress
Solid green	No tone	Charge complete
No calorie-free	No tone	Charge failure, contact Customer Care Centre

Afterward Removing from Receiver Charger
Continuous light-green or yellowish or cherry (5 seconds elapsing)	No tone	Battery Charge Indication. Occurs immediately afterwards unplugging the charger from the Receiver Collar
Operating Battery Status
Slow blinking light-green (every 4-5 seconds)	No tone	Collar battery charge 100%-60%
Irksome blinking yellow (every 4-five seconds)	No tone	Collar bombardment accuse lx%-twenty%
Ho-hum blinking crimson (every 4-5 seconds)	No tone	Collar battery charge twenty% or less, charge immediately

Receiver Activation Condition
Fast pulsating green (3 flashes per second)	Alert tone	Alert tone
Fast pulsating cerise (iii flashes per second)	Tone for duration of Static Correction	Static Correction being delivered up to 15 seconds
Continuous green (10 seconds)	No tone	Over Correction Protection; collar locked for 10 seconds

To Prepare the Static Correction Level

Read all steps before attempting to set the Static Correction Level.

Printing the Mode Button and release (2B) when the Receiver Indicator Calorie-free illuminates Red (2C).
The Receiver Indicator Calorie-free will emit a series of Carmine flashes representing the Static Correction Level.
Increase the Static Correction Level by pressing and releasing the Manner Button within 5 seconds of the previous series of flashes.
The Static Correction levels increment in strength from ane to 6. Pushing the Correction Level Button while the Receiver Collar is on level
vi will crusade the Receiver Neckband to revert to level one. Refer to the Function and Response Table to choose the Static Correction level
that all-time fits your pet.

Function and Response Tabular array
Indicator Light Response	Static Correction Level	Receiver Collar Function
ane Red Flash	1	No Static Correction, Tone Only
ii Red Flashes	2	Depression Static Correction
three Red Flashes	3	Medium-Low Static Correction
4 Red Flashes	four	Medium Static Correction
5 Red Flashes	v	Medium-High Static Correction
6 Ruby Flashes	6	High Static Correction

Over Correction Protection

If your pet enters the Purlieus Zone or continues anywhere across the Pet Area, this feature limits the Static Correction duration to xv seconds. While the arrangement locks out further Static Correction, the green light will remain on for 10 seconds.
In the unlikely event that your pet leaves the Pet Surface area, he volition not receive a Static Correction upon return to the Pet Area.

Step 3 Fit the Receiver Collar

Important: The proper fit and placement of your Receiver Collar is important for effective preparation.
The Contact Points must accept direct contact with your pet'south skin on the underside of his cervix.
See of import safety information on pages five-7.
To assure a proper fit, delight follow these steps:

Make sure Transmitter is not plugged in, and the receiver is turned off.
Start with your pet standing comfortably (3A).
To make it easier to hear the warning beep, place the Receiver Collar on your pet with the logo side of the Receiver facing your pet'south chin.
Middle the Contact Points underneath your pet'southward neck, touching the peel.
You may demand to trim the hair in the area of the Contact Points. Never shave the dog'south neck; this may lead to a rash or infection.
Check the tightness of the Receiver Collar by inserting one finger betwixt the end of a Contact Point and your pet's neck. The fit should exist snug but not constricting (3B).
Let your pet to wear the collar for several minutes then recheck the fit. Check the fit over again every bit your pet becomes more than comfy with the Receiver Collar.
Trim the collar as follows (3C):
a. Mark the desired length of the Receiver Neckband with a pen. Allow for growth if your pet is young or grows a thick wintertime coat.
b. Remove the Receiver Collar from your pet and cutting off the excess.
c. Earlier placing the Receiver Neckband back onto your pet, seal the edge of the cut neckband past applying a flame along the frayed border.

To Re-Thread the Neckband

The slide buckle prevents the collar from becoming loose around your pet's neck.

The ridges must be facing up; the collar volition slip if information technology is not properly threaded.

To loosen: Slide the strap through the Slide and Fasten Buckles and pull downwardly.

To tighten: Slide the strap upwards through the Spike Buckle and pull through the Slide Buckle

Taking Your Pet Out of the Pet Area

Important: Remove the Receiver Neckband and leave information technology in the Pet Area.
One time your pet learns the Boundary Zone, he will be reluctant to cantankerous information technology for walks or auto rides.
Option one: Replace the Receiver Neckband with a regular collar. Put your pet in a car that is within the Pet Expanse and drive him out of the Pet Area.

Option 2: Supervene upon the Receiver Collar with a regular neckband and leash. Walk your pet out of the Pet Area while giving a command such every bit "OK" at a specific place of the Boundary Zone (the end of your driveway, sidewalk, etc.). E'er get out the Pet Expanse with a leash at this place and your pet will associate leaving the Pet Surface area simply on a ternion, but at this place, and only with a person. You may initially need to convince your pet to leave the Pet Area with a food treat and lots of praise.
Note: You may also comport your pet out of the Pet Expanse.

Troubleshooting
The Receiver Collar is not beeping when setting up the Purlieus Zone.	Make sure the Receiver Collar is turned on and Battery Condition Lights are flashing every 4-5 seconds Charge Receiver Collar The beep may exist difficult to hear in a noisy environs. Use Test Lite as explained in the "Test Light Instructions" section, and utilise it to make up one's mind the location of the Purlieus Zone. Check that the Transmitter is fix upwardly according to directions.
The Receiver Collaris not beeping or administering a Static Correction.	Make sure the Receiver Collar is turned on and Bombardment Status Lights are flashing every 4-5 seconds Accuse Receiver Neckband Check that the Transmitter is plugged into a working 120-volt outlet, the Power Lite is on, and the Transmitter controls are set at your desired settings.
The Receiver Collar is beeping everywhere.	Check that the Transmitter is plugged into a working standard 120-volt outlet, the Ability Light is on, and the Transmitter controls are set up at your desired settings. Bring Receiver Neckband inside ten feet of the Transmitter to reset. Make certain no continuous alarm is sounding on the Transmitter.
The Receiver Collar is beeping within the firm.	It is recommended to remove the Receiver Neckband from your pet when indoors to avoid activation of the Receiver Collar. Make sure the Transmitter is plugged in and set up according to the directions. Ensure the entire house is inside the Pet Area. The Transmitter may need to be moved to adjust the Pet Expanse to include the entire house. If relocating the Transmitter, remove the Receiver Collar from your pet before removing ability from the Transmitter.
My pet is receiving a Static Correction in his metal crate.	The Receiver Collar activates when it loses the Transmitter signal. The metal crate may block the Transmitter point which causes the Receiver Neckband to actuate. Remove the Receiver Collar from your pet when placing him in his metal crate.
The Purlieus Zone seems to fluctuate.	This is normal for the electromagnetic field of the Stay & Play® Wireless Fence for Stubborn Dogs. The field may be afflicted by surrounding "electronic noise," which tin cause it to fluctuate up to 5%. Where the Receiver Neckband activates is influenced by the speed and orientation of the Receiver Collar equally your pet enters the Boundary Zone.
The Receiver Collar activates in the middle of the grand.	The Receiver Neckband activates when it loses the Transmitter indicate. This sometimes occurs if a large metal object is between the Receiver Neckband and Transmitter, if the orientation of the Receiver Collar changes near the Boundary Zone, or if the surrounding "electronic noise" interferes with the signal. If this continues to occur, consider relocating the Transmitter and resetting the Pet Area.
The Receiver Collar is beeping just my pet is not responding to the Static Correction.	Make sure the Static Correction Level is set at ii or in a higher place. Test the Receiver Collar with the Test Lite. If the Test Light flashes, check the fit of the Receiver Collar. Trim your pet'south fur where the Contact Points bear upon the neck and/or switch to the longer Contact Points. Contact Points must be in contact with the canis familiaris'due south skin. Increase the Static Correction Level. Echo training steps to reinforce grooming.
My pet reacts strongly to the Static Correction and has become fearful.	Lower the Static Correction Level. Brand sure you are in control of the situation when your pet receives his start Static Corrections (have him on a ternion fastened to a dissever, non-metallic collar) and lead him into the Pet Area and praise him. If your pet remains fearful, suspend preparation and start again the side by side 24-hour interval. Make certain to end all grooming sessions on a positive annotation with lots of praise and play.
I was setting up the Pet Area and subsequently I turned downward the Purlieus Control Punch, the Receiver Collar would no longer beep or correct.	You may take turned the Boundary Control Dial downwardly too chop-chop, causing the Receiver Collar to go into power-fail mode. This is a safety feature designed to protect your pet when power to the Transmitter goes out. With the Receiver Collar within 10 feet of the Transmitter, readjust the Boundary Control Dial and reset the Boundary Zone, making sure to plough the dial down slowly.
My side by side-door neighbor has an In-Ground Containment System and the Receiver dollar does not activate near their property	Your neighbour'south In-Ground Fence signal may interfere with the operation of the Receiver Neckband preventing activation close to their fence. To minimize the interference, reduce the size of the Pet Area or motion the Transmitter away from the In-Ground Fence System. Adjust the Pet Expanse then that the Receiver Neckband activates at least 5 feet beyond the reduced Boundary setting when walking towards the In-Ground Fence.
The Receiver Collar has injured my pet's neck.	Failing to follow the important safety information at the front of the Operating Guide has acquired pressure level ulcers. Some descriptions of advanced pressure ulcers draw the sores as looking similar burns on the domestic dog's neck. Be bodacious that electronic collars exercise non utilize enough free energy to create electric burns. The energy in an output pulse is only a few thousandths of a Joule; information technology is like in nature to the static pulse that you may experience when getting out of your car. In some cases, pressure level ulcers are described as chemical burns. The battery in your Receiver Collar is sealed, in add-on, your collar'due south housing is also sealed. This redundant sealing makes information technology about impossible, without misuse or corruption, for your Receiver Collar bombardment to leak onto your pet's neck. Delight review and follow the of import safety data on pages half-dozen-8, and the instructions in Step 3 under the heading "Fit the Receiver Collar" on pages 22-25.

Test Lite Instructions

Make certain the Receiver Collar Battery is properly charged. Set the Correction Level to two or above.
Concord the Exam Low-cal Contacts to the Contact Points.
Walk toward the Purlieus Zone property the Receiver Collar at your pet'south neck level until the Test Light flashes. Relieve Exam Calorie-free for future testing.

Terms of Use and Limitation of Liability

Terms of Apply
The use of this product is subject to your acceptance without modification of the terms, weather condition and notices independent with this production. Utilise of this product implies acceptance of all such terms, weather, and notices. If y'all practice non wish to accept these terms, conditions, and notices, please return the product, unused, in its original packaging and at your own cost and risk to the relevant Customer Intendance location together with proof of purchase for a total refund.
Proper Use
Proper Apply includes, without limitation, reviewing the unabridged Product Manual and any specific safe data statements. The specific temperament or size/weight of your pet may not be suitable for this product. If you are unsure whether this product is appropriate for your pet, please consult your veterinarian or certified trainer prior to use. For products used with pets where training is desired, Radio Systems Corporation recommends that these training products are non used if your pet is
ambitious and accepts no liability for determining suitability in
individual cases.
No Unlawful or Prohibited Use
This production is designed for use with pets but. This product is not intended to harm, injure or provoke. Using this product in a way that is not intended could result in a violation of Federal, State or local laws.
Limitation of Liability
In no event shall Radio Systems Corporation or whatsoever of its associated companies exist liable for (i) any direct, indirect, punitive, incidental, special or consequential damage and/or (ii) any loss or damages whatsoever arising out of or connected with the use or misuse of this production. The Purchaser assumes all risks and liability from the use of this product to the fullest extent permissible by law.
Modification of Terms and Conditions
Radio Systems Corporation reserves the right to alter the terms, conditions and notices governing this product from fourth dimension to time. If such changes have been notified to you prior to your utilise of this product, they shall be binding on yous as if incorporated herein.

Compliance

FCC
This device complies with part 15 of the FCC Rules. Operation is discipline to the following two weather condition: (one) This device may not crusade
harmful interference, and (2) this device must have whatever interference received, including interference that may cause undesired functioning.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and tin radiate radio frequency free energy and, if not installed and used in accord with the instructions, may cause harmful interference to radio communications. Notwithstanding, there is no guarantee that interference will not occur in a specific installation. If interference does occur to radio or telly reception, which tin be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from t at to which the receiver is connected.
Contact the Customer Intendance Center at +i (800) 732-2677.
Circumspection: Modification or changes to this equipment non expressly canonical by Radio Systems Corporation may void the user's authority to operate the equipment.

Australia
This device complies with the applicable EMC requirements specified by the ACMA (Australian Communications and Media Authority).

Customer CareInternational

USA & Canada — Tel: 800-732-2677
Monday – Friday 8 AM – 8 PM / Saturday 9 AM – v PM
Commonwealth of australia — Tel: 1800 786 608
Monday – Fri 8:thirty AM – v PM
New Zealand — Tel: 0800 543 054
Mon – Friday ten:thirty AM – 7 PM

Warranty

This product has the benefit of a limited manufacturer'southward warranty.
Complete details of the warranty applicative to this Production and its terms tin be plant at petsafe.com and/or are available by contacting your local Customer Intendance Centre.

Ezoic

Radio Systems Corporation
10427 PetSafe Way
Knoxville, TN 37932
+1 (800) 732-2677
petsafe.com
YU400-1623/2
©2021 Radio Systems Corporation

Documents / Resources

References

PetSafe® | Dog Fences | Feeders | Collars | Cat Litter Boxes

Source: https://manuals.plus/petsafe/wireless-fence-receiver-collar-for-stubborn-dogs-manual